| Customization: | Available |
|---|---|
| After-sales Service: | After Sales Service |
| Warranty: | 2 Years, 3 Years, 5years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Pole height | 6M | 6M | 8M | 8M |
| LED Lamps | 20W | 30W | 45W | 60W |
| Solar Panel | 110W*1PC | 80W*2PC | 120W*2PC | 150W*2PC |
| Solar Battery | 100Ah/12V*1PC | 150Ah/12V*1PC | 120Ah/12V*2PC | 150Ah/12V*2PC |
| Battery Box(Optional) | Engineering Steel | Engineering Steel | Engineering Steel | Engineering Steel |
| Battery Box(Optional) | Engineering Plastic | Engineering Plastic | Engineering Plastic | Engineering Plastic |
| Solar Controller | 10A/12V | 15A/12V | 10A/24V | 15A/24V |
| Packing:40'HQ | 150 Units | 130 Units | 100 Units | 90 Units |
| Pole height | 6M | 6M | 8M | 8M |
| LED Lamps | 20W | 30W | 45W | 60W |
| Solar Panel | 90W*1PC | 65W*2PC | 90W*2PC | 120W*2PC |
| Solar Battery | 100Ah/12V*1PC | 150Ah/12V*1PC | 120Ah/12V*2PC | 150Ah/12V*2PC |
| Battery Box(Optional) | Engineering Steel | Engineering Steel | Engineering Steel | Engineering Steel |
| Battery Box(Optional) | Engineering Plastic | Engineering Plastic | Engineering Plastic | Engineering Plastic |
| Solar Controller | 10A/12V | 15A/12V | 10A/24V | 10A/24V |
| Packing:40'HQ | 150 Units | 130 Units | 100 Units | 90 Units |
|
LED Street Lamp Producing Power 9W-250W High Lumen:150-150LM/W;Lifespan:50000-100000Hrs |
| * Technical Descriptions | |
|
* Lamp Body: High-Pressure Die-Casting Aluminum. Corrosion Resistant,IP65 or IP68
|
|
| * Application with Polyester Substance in its Surface. | |
| * Reflector: High Purity Aluminum or Stainless Steel SS304,Mirror Polish. | |
| * LED Cooler: Aluminum Material, Producing By Module | |
| * Cover Glass: High Strength and High Transparent Toughened Glass | |
| * Fastener Bolt and Screws: Stainless Steel, Anti-theft screw. | |
| * Ambient Temp:-40~+50°C;Humidity:10%~95% | |
| * Arm Diameter: 48 or 60mm | |
| Solar Panel 18V/36V--Poly &Mono Silicon 5W-310W | |
|
* Before Production
-Control Of Raw Material Before Use-Data Recording Of Raw Material---Products Tracebility |
|
|
* During production
-Control At Each Step Of Production-Validation Of Each Step By Quality Controllers |
|
|
* After production
-Systematic Flash Test On Each PV Modules-Quality Control With IEC Compliance -Tests In Our Facility Testing -Optional: Third Party Inspection Before Shipment If Needing. |
|
| * Limited Warranty -Workmanship for 5 years,90% of minimum power output over 12 years,80% over 20 years. -The Solar Panels Are Manufactured In According To The IEC61215 Standards.Lifespan:20-25 Years |
|
| Solar Battery 24AH~250AH/12V | |
| * Gelled battery, Sealed Type. Deep Cycle. Maintenance Free. | |
| * Real Green Power | |
| * Low Internal Resistance | |
| * Low Self-discharging Rate | |
| * Long-life Design | |
| * Wider Temperature Range | |
| * Extremely good discharge recovery ability | |
| Solar Charge Controller,IP68 Rating | |
| * Intellectual Control Technology Based On MCU And Special Software. | |
| * Adopt Tandem PWM Charge Control Method, So That The Voltage Loss Of Electrical Circuit Is Only The Half Of Diode Charge, Charge Efficiency To Improve By 3% - 6%. | |
| * The Over Discharging Recovery Control And Automatically Floating Charge Control Can Prolong The Battery Service Life. | |
| * Battery Reverse Connection Protection, Over-voltage Protection And Under-voltage Protection. | |
| * Solar Module Reverse Connection Protection. | |
| * Automatically Recovery Output, Output Over Current Protection And Out Short Circuit Protection | |
| * Intelligent Time Control System, It Can Set Up 1-15 Hours Timing Or Delay Time ( Set Period To Resume Current Output, Two Period Can Be Set.) | |
| * Light Control, Time Control, Temperature Control | |
| * High-precision Voltage Control For The Battery Safety Work. | |
| * Waterproof Design. | |
| Steel Pole From 3M-12M For Street Lighting. 15M-50M For High Mast Pole | |
| * Material -Q345B/A572,Minimum Yield Strength>=345n/mm2 -Q235B/A36,Minimum Yield Strength>=235n/mm2 |
|
| * Shape -Round, Multi-pyramidal, Column form, Polygonal Or Conical |
|
| * Production Process Raw Material Test→Cutting→Molding Or Bending →Welding (Longitudinal ) →Dimension Verify→Flange Welding→Hole Drilling →Calibration →Debur →Galvanization Or Powder Coating, Painting→Recalibration→Thread→Packaging |
FAQ:
Q1: How to make a reasonable solar street light design?
| 1 | What's your wanted LED POWER? (We can do the LED From 9W to 120W single or double design) |
| 2 | What's the Height of the Pole? |
| 3 | How about the Lighting time, 11-12hrs/day will be ok? |
If you have above idea, pls let us know, we will offer you based on local solar and weather condition.
Q2: Sample is available?
Yes, we welcome sample order to test and check quality firstly., and we will return your sample cost in your formal order.
Q3: How do you ship the goods and how long does it take to arrive?
Airline and sea shipping also optional. Shipping time depends on distance.
Q4: Is it OK to print my logo on LED light product?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q5: Do you offer guarantee for the products?
Yes, we offer 3-5 years warranty to our products, and we will do "Warranty Statement" for you after confirmed the order.
Q6: How to deal with the faulty?
1), Our products are produced in strict quality control system, but in case any damage in shiping, we will provide you more free 1% as spare parts.
2), during the guarantee period, we will provide maintance free and replacement service.
){kind=link}